CI-2500UPM Ultra SCSI PCI Host Adapter for Mac
 

• PCI Bus Burst Mode up to 133MB/S
• 20MB/S Ultra SCSI Transfer Rate
• Mac OS version 8.1 or later
• Compatible with hard disks, CD-Rs, Optical, Tape,
• Zip/Jaz drives and other SCSI peripherals
• SCSI Auto-termination
• On-board firmware supports bootable Mac OS
• SCSI Manager 4.3 compliant
• Bundle SCSI configuration utility and toolkit

   
  Downloads & Drivers
   
 

If you are running OS 9 with adapter, you will have to flash the firmware on the card so it will work under OS 9. You can download the OS 9 firmware here

How To Update the Firmware Mac SCSI Adapters?

  1. Download the current versions of the SmartSCSI and SIM fie for your respective adapter
  2. Next unStuff both files to the desktop
  3. Run the SmartSCSI application and select Setup/1st card configuration. The title bar on the next screen will list the version of the currently installed firmware
  4. Click on the button called Update Firmware near the bottom of the screen
  5. After about 10 seconds you will get a message that the update was successful
  6. Now click on the Load Defaults button and close all windows. Reboot the machine
   
  OS 8–9 Firmware Files
SIM v2.11—SmartSCSI v1.05
OS 10.2 Firmware
You must flash the firmware from OS 9.xx.
 
 
 
  干城科技股份有限公司 ©2003 CENTOS. All rights reserved. 
 Centos's Privacy Policy